C1 - Clinical

The C1 is a single solution for cooling, warming and compression. Cooling, warming and compression helps to accelerate soft tissue repair and recovery if applied at the correct points during the healing and recovery process. The C1 allows you to select and set up an appropriate and effective therapy and tailor it to each patient’s needs. Metabolism, BMI, stage and rate of healing, type and severity of injury, age, pain threshold and fitness are just some of the factors to consider.

Overview Tech Specs

Overview

PHYSIOLAB® C1 provides real time feedback and communication, meaning it not only responds to your patient’s physiological requirements, providing an effective treatment, but also provides an understanding of the state, condition and recovery speed of the treatment area.

Most methods using cold, heat and compression cannot be measured accurately, if at all. The result: the applied therapy may be of limited benefit or even detrimental. The C1 provides treatments which are accurate, reproducible, measurable and precisely controlled.

We deliver temperatures from 6°C to 40°C – Why?

6°C: Low enough for effective deep tissue cooling without causing numbness, cold burns and other complications.

40°C: High enough for effective deep tissue warming without causing ulceration, heat burns and other complications.

Technical Specifications

  • Therapy Options

    A toolkit with complete flexibility plus six template options for temperature and compression.

  • Thermo Fluid Temperature

    6 °C to 40 °C
    (Selectable in 1 °C increments)

  • Therapy Pack Inflation Pressure

    25 mmHg to 75 mmHg. Selectable in 5 mmHg increments. Treatment period selectable in 1 minute increments.

  • Treatment Period

    10 – 30 minutes

  • Thermo Fluid Coolant

    Sealed coolant system. ISO 10993-1:2009 tested propylene glycol based proprietary coolant.

  • Medical Device Class

    Elite Device : Class 2a, type B applied part
    Therapy Pack : Class 1

  • Medical Standards Applied

    EN IEC 60601-1 ed 3.1
    EN IEC 60601-1-2 ed 3.0

  • CE

    MDD Directive 93/42/EEC
    Material and Parts RoHS Directive 2011/65/EU
    Radio Equipment Directive 2014/53/EU

    Designed, built and maintained in the EU.

©2017 Physiolab Technologies. All rights reserved. Web design Kent